ARL 500 Panel

Compliance to Standards
En 81/1-2+A3
Number of Stops
48 Stops
Control Type
Single Button Pickup Double Button Pickup
Drive Type
Double Speed, Hydraulic, VVVF
Elevator Speed (Maximum)
2,5 m/s
Group Control
8
Serial Communication
With Floor and Cabin
Cabin Position Information
Magnetic Switches Encoder System
Automatic Door Control
Single Door Double Door
Door Bridging
Available
Display Outputs
7 Segments Gray / Binary Code LCD Display
Language Options
Turkish, English, Russian, Dutch, Polish, Swedish, French, Italian

Advantages of Using the ARL 500 Panel System

Kapı Kontrolü

Door Control

  • Any kind of automatic door control
  • 1 piece of door control inputs and outputs in the revision box, 2 in the control panel
  • Early opening of door and door open level renewal by door bridge circuit on the control card
Motor-Phase Protection

Protection Systems

  • Ready inputs / outputs on the control board and motor protection
  • Leakage current protected cabin and well feed fuses
  • Special connections for safety circuits in the control panel, revision box and downhole box
  • Well lighting control with pulse current switch (with buttons from the top of the cabinet and from the bottom of the well)
  • Door control independent of stops with double door support
  • Serial cabinet communication via CANbus line
  • One-to-one connection with the plug-in flat cable between the control panel and the revision box
  • Plug-and-play connection between cabinet operation panel and revision box with plug-in single cable
  • Serial communication via CANbus line
  • Well CANbus line extending along the whole well, with plug cables from floor to floor
  • Plug-in connection with plug-in cable attached to the CANbus line for each floor well for floor control panel
  • Door contact installation extending along the whole well, with plug cables from floor to floor
  • Connection with plug-in cables for floor-to-door contact installation for floor door plug- lock contacts
  • Plug-in connection with downhole box via single cable
  • Integrated AKUS-SD chip in the panel
  • Emergency lowering system (for hydraulic elevators) with ARL-SARJ card and 2 12V battery additions
  • Special test function for testing cabinet and floor panel connections
  • Controlling the ARL-500 board and ADrive speed controller from any point with a hand-held terminal connected to the CANbus line
  • Emergency alarm siren (with buttons on the cabinet and on the bottom of the well)