|
| General features: |
 |
Can be used with asynchronous (geared) and synchronous (gearless) lift drives. |
|
Provides greate travel comfort. |
|
Load-independent and sensitive stopping on the floors. |
|
High torque motor drive at all speed via space vector modulation. |
|
Up to 40% electrical usage savings. |
|
Elimination of startup problems with generators by the help of controlled motor current. |
|
Specifically designed for elevators. Special parameters for travelling comfort. |
|
10 KHz IPM switching frequency for low noise motor drive. |
|
Energy consumption through an internal DC reactor. |
|
4 low noise fans for efficient cooling. |
|
All isolated control inputs and outputs. |
|
Over-load, high voltage, low voltage, output short circuit, power lost, line phase control, over heat, ground fault, over-torque and other necessary protection functions. |
|
EMC tested and verified. |
|
7.5 kW, 11 kW, 15 kW and 22 kW power rating models. |
|
| Advanced features: |
|
Anti-rollback function to prevent the rollback without a load cell unit. |
|
Automatic travel curve correction function for short floors. |
|
Over-gain detection function to prevent motor oscillation. |
|
| Rescue operation with back-up power: |
|
Provides an evacuation operation by driving the motor with back-up power.
|
Power circuit: Can be supplied using 60-120V battery pack or 230VAC UPS with suitable power rating
Control circuit: Can be supplied using an external 24Vdc power supply
|
|
|
Optimum evacuation direction (lowest power consumption). |
|
| Special functions for synchronous machines: |
|
Static auto-tuning for synchronous motors (without rotating the motor). |
|
Mechanical brake release monitoring. |
|
Motor and brake resistor temperature monitoring. |
|
Special manual evacuation screen for displaying the direction of car, car speed and over-speed warning. |
|
| Encoder interface: |
|
Incremental encoder support (on device)
|
5V-24V, TTL, HTL, pnp output, npn output, totem pole output incremental encoders
Incremental encoder simulation outputs
|
|
|
Absolute encoder support (with an additional module ENCABIT-Plus)
|
EnDat, SSI and SinCos encoders
Absolute encoder simulation outputs
|
|
| User interface: |
|
User friendly LCD menus for all parameters and faults. |
|
ADriveWin simulator/monitor software for travel curve simulation, monitoring data and transferring parameters. |
|
Ability to update firmware via computer. |
|
Data Key for easy saving and transferring parameters. |
|
Remote control and monitoring via ADrive Remote Keypad. |
|
Serial communication with ARL-500 lift controller through RS-485 port. |
|
Ability to save last 256 errors to facilitate maintenance and repair. |
|
Monitorings for total working time, total travel distance and total number of travel (stop/run). |
|
Turkish, English and French language options. |
