|
| General Features: |
 |
Compatible with two speed, vvvf (geared and gearless) and hydraulic elevators. |
|
Can be used at any command type up to 24 stops. |
|
Can work with speeds up to 2 m/s. |
|
Car positioning with easy installation and safe detection. |
|
Integrated door bridging safety circuit for door pre-opening and relevelling with open doors. |
|
Integrated motor-phase protection circuit. |
|
Integrated automatic door control inputs and outputs for single door. |
|
Emergency lowering with 2x12V batteries for hydraulic lifts. ARL-SARJ charger unit controls the battery charge. |
|
Emergency evacuation functions for electric lifts:
For geared drive: by an external evacuation device (e.g. AKUS-SD)
For gearless drive: by releasing the brakes or by active motor driving
|
|
Easy connection with only 15 cables by using serial car installation boards which reduces labourand cable costs.
FX_SERI for up to 16 floors
FX_SERI_32 for more than 16 floors
|
|
Connection boards, which, are used instead of panel terminals are supplied with flexible parallel connection cables save extra connection terminals at control panel. |
|
| Signals and diagnostics: |
|
Programmable 7-segment, binary, inverted binary, gray, inverted gray codes and simple floor indicator outputs for position indicators. |
|
Alphanumeric characters for floor texts (e.g. L, P, E, F, H, b, o, 0, 1, 2, 3…) |
|
Short-circuit protected display and signalization outputs (with a warning message on lcd screen) |
|
At normal condition the lift can be monitored by messages on the LCD. (Waits for calls, high speed, low speed inspection). An error code with its explanation is displayed on the LCD at an abnormal condition. (e.g. H1: Door can’t be locked) |
|
The outputs which are adjusted to gray and binary codes counting initials can be set from the menu. |
|
Ability to save last 60 errors to facilitate maintenance and repair. |
|
| Additional functions: |
|
Fire-fighters service and emergency operation during fire. |
|
Panic input and evacuation function in state of panic. |
|
Car priority function with an adjustable command type (single, last or multiple car commands). |
|
Adjustable parking stop and destination duration to parking stop. |
|
Limitation of maximum car commands. |
|
Setting up the indicators to show only collective direction or current&collective directions together. |
|
Adjustable gong time settings (e.g. while opening the doors or when the elevator stops). |
|
Password protection of menu access and disabling of system after maintenance time. |
|
Giving a command to a specific floor or giving random calls by the keypad on mainboard. |
|
Slow speed operation by the keypad on mainboard. |
|
| Group operation:: |
|
Supports group operation up to 4 elevators without requiring any extra hardware or software. |
|
Group setting by changing only one parameter and monitoring screen for group operation. |
|
Ability to set different floor number for elevators in group. |
|
Group communication connection by 4 cables. |
|
| User interface: |
|
All system parameters can be adjusted by user via buttons and LCD on the mainboard. |
|
Adjustable lcd contrast setting from the menu. |
|
Turkish, English, Russian, Dutch, Romanian, German, Italian language menu options. |
|
| Conformity: |
|
EMC tested and verified. |
|
Full conformance to European lift directive EN81-1/2. |
