|
|
ARL-500 > Advanced Features
|
|
|
| Serial communication via CANbus
|
|
|
|
ARL-500 controller uses CANbus serial communication protocol to communicate with car and landing units.
|
|
|
|
|
|
|
|
|
|
|
Serial communication connection with 4 cables
Swift and secure serial communication
Easy cabling and low cost
Allowance for adding new units by plug & play structure without changing the system
Two separate CANBus lines for car and landing communications
Can work with distances up to 48 stops
|
|
| Car positioning with encoder
|
|
|
|
ARL-500 control system can take digital car position data from incremental encoder.
|
|
|
|
|
|
|
|
|
|
Allows you to save from magnets and related labor. Requires only one door zone magnets in each floor for door pre-opening, re-levelling and encoder data correction)
Easily installed, reliable and problem free digital shaft data system
Floor settings within the car
Fine-tuning of floor levels in mm for each floor
Compatible with Electric (VVVF and 2-speed) and Hydraulic lifts
Ability to work with incremental encoder attached to motor shaft or over-speed regulator
Compatible with encoders of different output type and resolution in different working voltages
|
|
| Free Programmable Inputs/Outputs
|
|
|
|
In ARL-500 system, there are free inputs and outputs on main board, car units and landing units that can be programmed by the menu. Thus, system can be adjusted for application, changes can be done when required and immediate actions can be taken in case of a malfunction.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Special menus for all programmable inputs and outputs in the system
Ability to program every single input and output one by one
Several ready made functions to be assigned to inputs and outputs
Allowance for a programmable input to directly control a programmable output
|
|
| Group Communication
|
|
|
|
ARL-500 controller supports group operation up to 8 elevators without requiring any extra hardware or software.
|
|
|
|
|
|
|
|
Group communication connection by 3 cables
Minimum waiting time by optimized group control
Group setting by changing only one parameter
Option of separating elevators from group and make them work independently
Detailed monitoring screen for group operation
|
