 |
All system parameters can be adjusted by user via buttons and LCD on the card. |
|
Can be used at any command type up to 16 floors. |
|
Can be used in group operation. |
|
All panels in the group are same and no extra panel is needed. Only to do is setting each panel as A,B and C in the program menu. |
|
Compatible with VVVF drivers. |
|
Only two cables needed for group communication. |
|
Floor detection is carried out by counter system. Only 3 magnetic swtiches for one speed and 4 for two speed systems including limit switches are used for any number of floors. |
|
An error code with its explanation is displayed on the LCD at an abnormal condition. (Ex. H1:Door can not locked) |
|
At normal condition the lift can be monitored by mesages on the LCD. (Waits for calls, high speed, low speed, inpection) |
|
Each floor can be named by an alphanumeric character. (L,P,E,F,H,b,o,0, 1,2,3…..) |
|
7-segment and signalization outputs are short-circuit protected.In a short ciruit case the concerned output is shut down until problem is removed and a message stating which output is short-circuit displayed on LCD. ( D segment short circuit) |
|
Only 15 cables are enough for system to work by using serial car connection (FX_SERI) which reduces labour and cable costs. |
|
No extra switch needed at high speed lifts (1,6m/sn) for early slow down. |
|
Turkish, English, Dutch, Romanian, French language menu options |
|
Designed according to Europian lift standart EN-81. |
